Browse all practice questions for the North Carolina Fire Investigation Technician (FIT) Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Ignite Your Future with the 2026 North Carolina FIT Test – Become a Fire Investigation Pro! course image
All questions

These questions are part of the practice quiz. Start practicing

  • Which of the following are considered fire effects?
  • Improperly installed aftermarket equipment may lead to what issue?
  • What is the primary objective of a fire cause and origin investigation?
  • What sources can provide relevant information related to a fire's origin?
  • In fire investigations, what is the significance of identifying the area of origin?
  • What does NFPA 1033 refer to?
  • In fire investigation, what role does understanding heat capacity play?
  • Which four components are required to support combustion?
  • What is an administrative search warrant designed for?
  • Which phenomenon refers to the intense heat radiation generated during an explosion?
  • Where is public mode notification typically used?
  • What characterizes low-order damage?
  • What type of signal indicates a problem within the fire alarm system?
  • What is the first admissibility requirement under FRE rule 702?
  • Effective scene searching during investigations primarily aims to achieve what?
  • How does carbon monoxide typically enter the body?
  • What effect does a blast pressure injury have on an individual?
  • The optimum concentration for combustion is typically what?
  • What is the first step in assessing hazards and risks?
  • When collecting evidence from a wire, what should it reference?
  • During what condition does radiation become the dominant means of heat transfer?
  • What defines alternating current (AC)?
  • What defines a thermal runaway condition?
  • Dry chemical extinguishing agents do not __________.
  • Where can hydrogen gas be present during vehicle fires?
  • What role does an investigator play regarding the conclusion of a fire investigation?
  • What is the significance of recognizing changes in gypsum wallboard during a fire investigation?
  • What does the term "danger" indicate according to ANSI Z 535.4?
  • What can hot embers carried by the wind initiate?
  • Why should a smoldering ignition source not be disregarded?
  • How is temperature defined in the context of physical evidence?
  • Radiation is transferred more easily between which types of sources?
  • Which phenomenon has received significant attention related to fire studies?
  • True or False: Temperatures in most structure fires typically exceed 1900 degrees Fahrenheit for long durations.
  • What is the definition of fire investigation?
  • What emotional condition is often linked to juvenile firesetting?
  • True or False: Only one hypothesis should remain after testing all origin hypotheses for an investigator to select it as the final hypothesis.
  • What is the primary focus of a fire investigation?
  • What does the term "pugilistic attitude" describe?
  • What size are fire sprinkler system indicating valves typically?
  • Which type of sprinkler system activates when a certain temperature threshold is met?
  • When are vaporizers frequently used?
  • What are fire patterns primarily characterized by?
  • What are protected areas?
  • Which of the following are units of electricity?
  • What is the first component of the fire tetrahedron?
  • What is OSHA and why is it important?
  • TRUE or FALSE: All compartment fires will evolve to a flashover stage.
  • What is an interrogatory?
  • In fire investigation, what is crucial for ensuring the preservation of evidence?
  • At what internal temperature do catalytic converters usually operate?
  • A hypothesis is an attempt to answer which step of the scientific method?
  • Which NFPA standard addresses the competence of responders to hazardous materials incidents?
  • When burned, thermoplastics do not produce which of the following?
  • Where is service equipment typically located in a building?
  • True or False: Most fuels must liberate fuel gases or vapors for ignition to occur.
  • An administrative search warrant cannot be employed once there is evidence of which situation?
  • What occurs during lateral confinement?
  • What is typically the first step after a fire has been extinguished during an investigation?
  • True or False: An investigator should work alone during any fire scene examination.
  • What do pressure gauges measure in relation to tanks?
  • What is the consequence of oxygen levels falling below 10 percent?
  • What is vapor density defined as?
  • How do many circuit breakers function?
  • According to ANSI Z535.4 standards, what does a caution label indicate?
  • The rate of heat transfer is affected mainly by which factor?
  • Which of the following is NOT a criteria for a confined space according to OSHA?
  • What is the term for the heating of a fuel to the point where it ignites without an external ignition source?
  • True or False: If fuel packages are located in the corner of a room, the flame height will not increase.
  • The difference between flame spread and fire spread is:
  • How is a hypothesis best defined?
  • What can an overload in a circuit cause?
  • What phenomenon describes acoustic soot agglomeration?
  • An investigation must take place within a "reasonable time" following which event?
  • Why are crowns considered significant in fire investigations?
  • What is described as the output in a system?
  • Which factor is crucial when documenting a fire scene?
  • What does fugitive gas refer to?
  • What is the purpose of NFPA 1033?
  • What do fused links or circuit breakers prevent in a vehicle's electrical system?
  • What is the primary purpose of fire investigation?
  • What contributes to the rapid increase in surface temperature of plastic foams?
  • Comparison of char depths should only be made on what basis?
  • What are fusible plugs?
  • What is the significance of documentation in fire investigations?
  • What happens to the combustion rate when the fuel mixture is either fuel rich or fuel lean?
  • An occupant's actions during an emergency are influenced by which of the following factors?
  • How can mechanical sparks occur?
  • In fire investigations, one should work from which area to which area?
  • What does cross-contamination refer to in fire investigations?
  • During a fire investigation, why is it important to document the scene surrounding a vehicle?
  • Flame spread in a fire context refers to:
  • Why do electrical systems in hybrid or electric vehicles pose an increased shock hazard?
  • What should be monitored closely during fire suppression efforts?
  • Are temperature and heat interchangeable terms?
  • Like other analytical tools, arc mapping is useful for ___________.
  • True or False: In some designs, the pilot light burns consistently, while in other designs the burner is ignited electronically.
  • Propane has a specific gravity greater than which substance?
  • True or False: If a fire continues to intensify and grow, the rate of mass loss will increase.
  • Which gas is NOT typically released during a fire?
  • Where is the fire heel situated in relation to the fire head?
  • What is an AFCI?
  • NFPA 1033 specifies minimum standards for which of the following?
  • What are RVs often used for with natural gas or LP gas systems?
  • What is the purpose of switches in fire safety systems?
  • What is a required addition to LP gas and commercial natural gas by law?
  • What does it indicate if the K-factor value is high?
  • Which of the following does NOT qualify as physical evidence?
  • Who is responsible for managing access to a fire investigation site?
  • What does an event data recorder do?
  • What kind of damage can prevent the use of analytical tools during an investigation?
  • What should be done before moving a deceased body found in a fire?
  • What do most interior seats and padding provide in a vehicle fire?
  • Which of the following is NOT a reason to conduct fire spread analysis?
  • What is the maximum allowed percent capacity for transporting storage tanks?
  • What are some physical signs that may indicate someone is lying?
  • Where is a doughnut-shaped pattern typically found during a fire investigation?
  • What should an investigator consider when evaluating witness statements?
  • What do smoke detectors primarily rely on to initiate an alarm signal?
  • What type of evidence includes items that can physically be analyzed?
  • A deposition is __________.
  • What is the primary difference between protected areas and heat shadowing?
  • What are the four general circumstances that justify a search and seizure in a fire investigation?
  • What is the potential consequence of toxins lingering after a fire?
  • Which of the following factors does NOT influence the effects of heat on a body?
  • What is the purpose of conducting an administrative review?
  • A thermopile consists of a series of what?
  • What is relative humidity?
  • How is heat shadowing caused?
  • Which of the following is a potential source of evidence in a fire investigation?
  • What does beveling on wooden wall studs indicate?
  • Which of the following are hazard condition categories?
  • What type of notification is essential in healthcare facilities during a fire?
  • How can static electricity discharge occur?
  • Why should investigators be cautious about witness statements regarding fire growth?
  • What requirement must fact witnesses meet to testify?
  • Why is exhaust venting required in buildings?
  • What is a critical factor in the legal admissibility of photographs as evidence?
  • Which of the following is an example of an initiating device in fire investigation?
  • What role does a generator or battery play in an electrical system?
  • If an investigator chooses not to utilize NFPA 921, what must they be ready to do?
  • What is the NFPA standard for workplace electrical safety?
  • Which types of valves are commonly found in appliances?
  • True or False: Containers are required by the US Department of Transportation to have pressure relief valves or fusible plugs.
  • Which of the following is NOT a factor affecting char rate?
  • What are the two factors related to the visibility of arc damage?
  • What is the importance of heat in an exothermic reaction?
  • What is essential to assess when examining fire patterns?
  • Which of the following is NOT a generally recognized category of evidence?
  • What is expectation bias?
  • Which of the following does NOT support combustion?
  • By what means is the authority to conduct a fire investigation granted?
  • When documenting an over-current protection device, which of the following is important?
  • What is the primary reason experts must stay current according to NFPA 1033?
  • When should witnesses be separated during an investigation?
  • Why are undeployed airbags considered a safety hazard?
  • Active fire protection systems are categorized into which three general areas?
  • Which weather conditions can exacerbate a fire's intensity?
  • What is fire spread analysis primarily focused on?
  • What defines a meter base in electrical systems?
  • What is the main objective of document analysis in fire investigations?
  • When is a criminal search warrant typically issued?
  • What can happen to rock and soil when exposed to higher temperatures?
  • Which type of explosion results from a fire engulfing a bulk liquid?
  • A shut-off valve is primarily used for what purpose?
  • What role does thermal imaging play in a fire investigation?
  • How do smoke detectors function to detect smoke?
  • Which factor can lead to the creation of a fire storm?
  • What are the four major fuel groups identified for wildfire fuels?
  • A material will display more evidence of oxidation when exposed to what condition?
  • Seismic effect injuries may present as which of the following?
  • How are V-patterns created?
  • What are examples of different compounds produced during the combustion process?
  • What is the equation for calculating power in an electrical circuit?
  • What is arc mapping?
  • What can oxidation of non-combustible materials produce?
  • What is heat?
  • What is one critical element to consider when discussing hazards at a site?
  • Why is continual atmospheric monitoring necessary at a fire scene?
  • Which hazard is significant when dealing with natural gas?
  • What can cause hazardous overheating in electrical equipment?
  • What are privileged communications?
  • The medical community estimates burn damage using which method?
  • What is the first step if an investigator suspects the presence of a liquid?
  • What is the best description of a smoldering fire?
  • Which serious outcome is commonly linked to spontaneous human combustion?
  • How often is NFPA 921 revised?
  • What is natural gas?
  • Which search pattern is NOT typically used in fire investigations?
  • What characterizes high-order damage?
  • What does arc mapping help an investigator determine?
  • What consequence can result from a gas leak originating underground?
  • What is confirmation bias?
  • What does the Response Time Index measure?
  • In hypothesis testing, what does "timeline" refer to?
  • What type of evidence will most directly point toward an incendiary fire?
  • True or False: Rapid fire growth is a reliable indicator of an incendiary fire.
  • What should investigators aim to achieve with arc mapping?
  • What is a firebrand?
  • Which of the following is a characteristic of evidence in an investigation?
  • Where is direct current typically found?
  • What is a turbocharger?
  • Why do ventilation controlled fires tend to burn more intensely?
  • TRUE or FALSE: The relationship in space of the arc sites is significant evidence.
  • What should a fire investigator always be aware of on a scene?
  • What effect does heat have on the body that may cause a specific posture?
  • What indicates a proper investigation method?
  • What does the presence of melted metals in a vehicle indicate?
  • What role does an incident command system play in a fire investigation?
  • What does identifying the first points of failures or conductors help determine?
  • What type of evidence is important for proving the intent in an arson case?
  • What information should you gather from a witness at a fire scene?
  • What is the effect of rapidly cooling glass?
  • In terms of fire investigation, understanding electrical failures is crucial for identifying:
  • Where is non-combustible construction primarily used?
  • In vehicle fires, which of the following is NOT a fuel category?
  • What is the purpose of fuses, circuit breakers, or fusible links in a vehicle?
  • What role does temperature play in the behavior of gas during a fire?
  • What are the most common forms of demonstrative evidence?
  • If the investigation reveals that fuel gas may be involved, the investigator should verify the ___.
  • What is the primary energy source in a vehicle?
  • The intentional burning of property that is not categorized as arson is typically considered what?
  • What is the common penalty for most arson offenses?
  • What is a fire storm?
  • TRUE or FALSE: Failure to consider the growth and spread of a fire can lead to incorrect conclusions.
  • What does a third degree burn typically result in?
  • Which of the following accessories attached to the engine can fail during a fire?
  • What is affected by the thermal conductivity of an object?
  • What is the likelihood of an accidental fire occurring after a vehicle theft?
  • Why is an uninhibited chemical chain reaction significant in fire dynamics?
  • In what three ways is heat transferred?
  • What does the term 'flashover' refer to in fire dynamics?
  • How is fire best described?
  • Surface fuels refer to flammable materials located at what height?
  • What happens to smoke particles as a fire grows?
  • What does a fire investigator do after determining the area of origin?
  • When should an additional regulator be installed in a fuel gas system?
  • What is one key factor when assessing a fire's behavior?
  • To be involved in the combustion process, fuels must generally be in what state?
  • True or False: Static may accumulate in liquid, particularly with liquid hydrocarbons.
  • Which of the following is NOT a type of valve commonly associated with fire investigation?
  • What does fire dynamics study?
  • How is humidity typically expressed?
  • What is referred to as the service entrance in electrical terms?
  • How can the presence of cupping be identified?
  • In incidents where individuals survive but are injured, what should the investigator do?
  • How should serious injury fires and explosives be investigated?
  • Rule 701 effectively limits _______.
  • What is defined as the lowest temperature at which a liquid emits sufficient vapors to support a momentary flame?
  • Negligence is best defined as what?
  • What role does an exhaust vent serve in a fire investigation context?
  • A camera with a resolution of at least what is recommended for fire investigation documentation?
  • The term 'flashpoint' refers to ______.
  • How does conduction occur in fire scenarios?
  • True or False: Comparing relative depth of calcinations is a reliable method for indicating fire spread.
  • Which two temperature scales are the most common in empirical studies?
  • Which of the following does NOT contribute to effective fire alarm notifications?
  • What does the color white/light gray signify in wiring?
  • Which of the following is an example of an incendiary device?
  • When conducting a fire investigation, what is a critical factor to monitor?
  • Which statement about hypothesis formation is accurate?
  • How does an ionization smoke detector function?
  • What is the legal term for intentionally starting a fire or causing an explosion?
  • What information can be found on a hydraulic data nameplate?
  • What is the role of transformers in fire investigations?
  • What is a fire flank?
  • What is the primary function of firefighter ventilation techniques?
  • What is a common ignition source associated with resistance heating?
  • What does oxidation involve in a combustion context?
  • What should influence an investigator's decision to collect physical evidence?
  • Which of the following is an example of available liquid fuels in vehicles?
  • What should fire investigators examine in smoke detectors and alarms?
  • PVC can become brittle due to:
  • Should an investigator consider the location of fuel packages?
  • What role do pilot lights and open flames from appliances often play in fire situations?
  • What is the typical arrangement in larger electrical structures?
  • How is Heat Release Rate (HRR) measured?
  • Why is documentation critical in fire investigations?
  • What potential hazard can arise from an improperly operating engine regarding the exhaust system?
  • Which of the following is a natural means that can cause multiple fires?
  • What aspect of fire investigation was highlighted by unusual flame patterns?
  • How is an accidental fire characterized?
  • What category do flaming ignition sources fall under?
  • Why is hydrogen cyanide particularly concerning during investigations?
  • Exhaust venting is required for what reason?
  • Where are smoke detectors typically installed for optimal effectiveness?
  • Which of the following best describes an 'accelerant'?
  • Why is it essential to obtain samples properly during an investigation?
  • What should be the focus of data when forming hypotheses?
  • What is physical evidence also referred to as?
  • What is the purpose of a photo log in fire investigation?
  • Where can patterns created by full-room involvement typically be found?
  • What unique identification is required by the NHTSA for RVs?
  • How many standard firefighting orders exist?
  • What can be deduced about the standard methods of communication in investigations?
  • Heat naturally moves from areas of:
  • Which of the following is a common gaseous fuel found in motor vehicles?
  • Which factor is NOT typically considered in fire investigation?
  • What is typically impacted by heat transfer in wildfires?
  • True or False: Accelerated fires burn faster than non-accelerated fires do, but they do not burn at higher temperatures.
  • Scene photos during an investigation should be accompanied by what?
  • What process involves the direct transfer of heat between objects in contact?
  • What is a smoke alarm?
  • What does amperage represent in electrical terms?
  • When does the peak Heat Release Rate occur in a fire?
  • True or False: It is difficult to absolutely prevent static electricity.
  • What type of pattern can indicate the direction of a fire's origin?
  • Beneath what percentage of oxygen does impairment of motor and mental skills begin?
  • Area fuels are typically found at which height?
  • Which of the following can be used as points of reference when writing a report?
  • What is typically the primary goal of the fire investigation process?
  • What type of gauge gives readings of liquid contents at various levels?
  • What must each type of incident investigated by an investigator establish?
  • What should be done as soon as possible before a scene becomes altered?
  • What issue can arise from labeling an "irregular pattern" based on visual appearance alone?
  • What is the primary purpose of determining the origin of a fire?
  • What does "oxidation" in the context of fire investigation refer to?
  • What aspect of fire investigations does the term "initial scene assessment" refer to?
  • What is the most common fuel char is found on?
  • How is heat measured?
  • Which factors can influence the temperature of an electrical arc?
  • Mechanical power for motors is usually expressed as what unit?
  • True or False: Pure natural gas is lighter than air.
  • Loss, destruction, or material alteration of an object or document that is evidence or potential evidence in a legal proceeding is known as _______.
  • What is smoke and how is it created?
  • What is aluminum primarily used for in fire safety?
  • What could be an issue if aftermarket equipment is added to a vehicle without proper installations?
  • A lack of fire stops in a building may allow for what?
  • According to fire investigation principles, what is critical to establish at the hypothesized origin?
  • Which type of flame is known for consuming most fuels?
  • How is Heat Release Rate (HRR) measured?
  • What is a crucial factor for maintaining the integrity of evidence?
  • Which OSHA standard utilizes a lockout/tagout device that can disable equipment?
  • An active fire alarm system can provide the fire investigator with:
  • Fire investigators can primarily be found in which two sectors?
  • What must occur for combustion to take place?
  • What is the primary composition of commercial propane?
  • Natural gas is typically recovered from what source?
  • An increase in visible products of combustion is most likely due to:
  • What is a building's fuel gas system primarily used to control?
  • What is convection primarily associated with?
  • What defines a 'total burn' at a fire scene?
  • What is the implication of the term "flashover" in fire dynamics?
  • Flame heights are classified into how many regions?
  • What is described as a reaction that travels through air at subsonic velocities?
  • What does metal to pavement contact typically produce?
  • Fuel elements in models are primarily grouped based on which of the following characteristics?
  • What does the K-factor represent in fire calculations?
  • What is the primary purpose of installing valves in a gas piping system?
  • Deflagration is characterized by what?
  • What can result from the disassembly of evidence in an investigation?
  • Who should be kept at a safe distance from the fire scene?
  • What is one possible hazard of utilizing burners that are turned on but not lit?
  • What concept is important to utilize in fire investigations?
  • In the context of hypothesis testing, why is disproving important?
  • Once the origin of a fire is identified, what should the investigator determine next?
  • What are manual initiating devices limited to?
  • Full room involvement can result in the production of which type of patterns?
  • What aspect is crucial for understanding arc sites in fire investigations?
  • When a single hypothesis cannot be determined, what term is used to describe it?
  • What do ground fuels primarily consist of?
  • At what skin temperature does pain generally start to result?
  • Should speculative data be included when creating a hypothesis?
  • How does inductive reasoning work in the context of investigations?
  • What does the 5th amendment protect against?
  • What role does documentation play in fire investigations?
  • An incendiary fire is ______.
  • Examples of notification appliances include:
  • Which NFPA standard is related to sprinkler systems in one- and two-family dwellings?
  • Which NFPA standard clarifies the competencies of EMS personnel during hazardous incidents?
  • Which of the following is NOT an organic fuel?
  • Before investigating a vehicle, what condition should investigators assess?
  • What is the most common valve that controls gas flow from the container?
  • What are the two basic fuel systems utilized in gasoline-powered vehicles?
  • What is a potential ignition source from overloaded wiring?
  • What does NFPA 921 provide for fire investigations?
  • What is defined as any current in gross excess of the rated current of equipment?
  • Compared to cold air, warm air will hold more of what substance?
  • Which of the following can be a result of combustible materials near heaters?
  • What type of circumstances involve permission to take action during a fire?
  • In investigations, components from an involved fuel gas system should be what?
  • Class A foam is characterized by having a lower what?
  • Which of the following is NOT considered demonstrative evidence?
  • What is LP gas primarily composed of?
  • Why is it important to document an interview properly?
  • Before conducting a vehicle fire investigation, an investigator should prepare by gaining knowledge about what?
  • What does any other color in wiring indicate?
  • In a single phase system, what does the neutral conductor do?
  • Which characteristic describes wildland V-shaped fire patterns?
  • In legal terms, who is considered a defendant?
  • What should an investigator do continuously through sifting, reconstruction, and evidence examination?
  • What describes the phenomenon of the doughnut-shaped pattern in fire investigations?
  • LP gas distribution systems have a difference from natural gas systems in that:
  • What is the first step of the scientific method?
  • What is often true about short-duration arcs?
  • What determines the K-factor in sprinkler systems?
  • What occurs to moisture in concrete when there is rapid heating in a fire?
  • What does the main disconnect provide in a service equipment system?
  • What risk does an investigator face if they are complacent?
  • Where would private mode notifications be more appropriate?
  • What is referred to as the 'headspace' in fire investigation?
  • What does a weatherhead prevent from entering the electrical conduit?
  • The stoichiometric ratio is ________.
  • What is a pressure relief valve designed to do?
  • What is the function of a combustible gas indicator?
  • How is a guide different from a standard?
  • What is a major skill of accelerant residue evidence collection?
  • A common challenge in fire investigation involves understanding patterns of?
  • In the context of fire investigations, which fluid types are primarily focused on?
  • What is a primary characteristic of diffusion flames?
  • Which materials are most often used to construct gas mains and services?
  • What is a pressure relief valve classified as?
  • The conductor size determines:
  • What does thermal conductivity influence?
  • What critical aspect is part of gathering evidence at a fire scene?
  • What is the primary source of electrical energy in a vehicle that is not running?
  • A fire is what kind of reaction?
  • What is the main focus of NFPA 921?
  • How is the diameter of a wire commonly measured?
  • How are depth measurements plotted?
  • What is meant by a projected fragment effect?
  • What is an essential step before excavating debris from a fire scene?
  • Which of the following would NOT contribute to the cause of accidental fires?
  • Why might a firesetter from a broken home engage in fire-starting behavior?
  • Which type of smoke detector uses light scattering or obscuration for operation?
  • Before removing evidence from the fire origin area, what must be done?
  • What can burners that have been turned on but not lit provide?
  • When evaluating evidence, what is a crucial factor to consider?
  • What is the first step in identifying collected physical evidence at a fire scene?
  • Where are cylinders most frequently used?
  • What is an example of defining the problem in the scientific method during a fire investigation?
  • What is the common visual representation of an inverted cone pattern?
  • Which of the following represents one of the standard fire orders?
  • What characteristic distinguishes gas flows in fire investigations?
  • Children in which age group are classified as child firesetters?
  • Which amendment affords the right to counsel in legal settings?
  • What does larger wire indicate regarding current capacity?
  • What is the most frequent cause of fuel involvement in fires?
  • What type of electrical line do RVs typically have?
  • What is oxidation in relation to combustion?
  • Where is a water flow switch found and what is its purpose?
  • Which of the following best describes fuel gas?
  • What role does a turbocharger play in modifying air intake?
  • What are the minimum requirements by NFPA 1033 to be a fire investigator?
  • Where do the most common leakages in fuel gas systems occur?
  • What are a few of the methods that can be used to collect samples of gaseous vapors?
  • Under which US constitutional amendment must every entry onto a fire scene be justified?
  • What is the purpose of the soap bubble solution in fire investigations?
  • In fire investigations, what is the consequence of high ampacity?
  • What is a primary cause of severe fire damage to structures?
  • What characterizes saddle burns?
  • How does a remote supervising station fire alarm system operate?
  • What burns are characterized by damage to underlying tissues?
  • What is the primary concern when transporting physical evidence?
  • What does weather history provide in relation to fire behavior?
  • Where should a pure ignitable liquid sample never be placed?
  • Which type of evidence is created specifically by a witness or attorney to illustrate a point?
  • What defines the relationship between fire behavior and the presence of snags?
  • What does overload refer to in electrical terms?
  • In the context of fire investigations, what role does step 2 of the scientific method play?
  • What is the purpose of fire stops in a building?
  • How can flames produced during combustion be categorized?
  • What issue can arise from high pressure fuel injection systems?
  • Which of the following is NOT a factor influencing fire growth?
  • In wire gauge, what does a smaller AWG number indicate?
  • What visible occurrence may happen when pulling a plug while current is flowing?
  • What does a flashover indicate during a fire event?
  • Protocols in fire investigations need to be flexible enough to allow for what?
  • Sequential data provided by arc mapping can primarily assist in?
  • What results from the partial intersection of a cone pattern on both vertical and horizontal surfaces?
  • What are modified ignition sources?
  • When does a non-seated explosion occur?
  • What defines the categories of ignition sources?
  • TRUE or FALSE: Fingerprints usually disappear from surfaces after a fire.
  • The determination of origin begins with which process?
  • When a conductor has been severed by an arcing event, what can be concluded?
  • Arson to an occupied structure is generally classified as what degree?
  • A right of entry for a fire investigation can be granted by which method?
  • Natural gas piping cannot be run through which of the following?
  • What is the primary purpose of a fire alarm control unit?
  • During an investigation, what role do witness statements play?
  • A protocol should be _________ and ________ to interested parties.
  • What is meant by arc mapping in fire investigations?
  • What is the significance of analyzing fire patterns?
  • Pointer and arrow patterns are important for what reason?
  • Which element is essential for the combustion process in a fire?
  • What happens to the skin when exposed to high temperatures in a fire?
  • What is an affidavit?
  • What is the primary function of an air sampling smoke detector?
  • What are the four ways that lightning can enter a structure?
  • What is the nature of direct current (DC) in electrical terms?
  • What is the primary function of police fire investigators?
  • What phenomenon occurs when circuits overheat?
  • What is a chain of custody?
  • What is a critical approach to examining evidence?
  • Which type of smoke detector responds more quickly to smoldering fires?
  • Which of the following is a common known fuel package?
  • Where are linear fire patterns usually found?
  • Which of the following is a component of the three-step hazard assessment process?
  • What is physical evidence?
  • What causes annealed springs to form?
  • Who provides guidance on methods for investigating fire and explosion incidents?
  • Static electricity can be generated by the movement of which substance?
  • What defines the area of origin in a fire investigation?
  • Which term describes a combustion reaction that propagates at supersonic velocities?
  • Which of the following is considered the basic law of electricity for a resistive circuit?
  • What is ampacity?
  • Which materials are known to produce large amounts of dense black smoke when burned?
  • Which of the following is NOT a basic function performed in fire investigations?
  • Is it true that the appliance must be compatible with the type of gas it uses?
  • What is a fixed level gauge used for?
  • What is not granted to an investigator by the authority to investigate a fire?
  • Long, unusual flame and heat damage at floor level is usually caused by what?
  • What must an investigator determine when dealing with fire protection systems?
  • What does the arson-reporting/immunity act require from insurance companies?
  • The reaction between oils, fats, and dry chemical agents is called __________.
  • What are the three basic causes of fire patterns?
  • What is the definition of "snags" in the context of fire investigation?
  • What should be done if a strong odor of an ignitable liquid is present in a sample?
  • Which of the following are considered the three primary components of a fire alarm system?
  • What is the primary concern of any investigator on scene?
  • What is considered a clean burn?
  • Which type of flame is considered the upper region of the flame?
  • Which component is crucial for providing electrical energy in vehicles?
  • Which item would be considered a personal item in fire investigations?
  • What is characteristic of a back-stabbed receptacle?
  • What terms describe factors that may hinder or aid in wildfire suppression efforts?
  • Which of the following is NOT a characteristic of blow holes?
  • What is a common physiological effect of heat exposure on muscles?
  • OSHA requires how many criteria to establish a proper permit-required confined space?
  • What are the two most common fuel gases used within a structure?
  • Which of the following are considered common examples of physical evidence?
  • Which aspect is crucial for investigating fire dynamics?
  • What minimum percentage of commercial butane is typically composed of butane and butylene?
  • What can sufficiently ignite from contact with heated exhaust system components?
  • Which two gases are commonly released during a fire?
  • What must an investigator be able to recognize when dealing with evidence?
  • What contributes to the ignitability of liquids when in contact with hot components?
  • Data collection in fire investigations includes which of the following?
  • What does the term "flashover" refer to in fire science?
  • What does grounding refer to in electrical systems?
  • Which instrument can help indicate the percentage of lower explosive limit in a gas mixture?
  • Where are turbochargers typically located within an engine?
  • Which of the following is NOT considered an incendiary device?
  • In which situation would collecting evidence be most critical?
  • What is introduced when a window breaks or a door is opened during a fire?
  • What condition must photographs meet to be considered a true representation in court?
  • Which of the following is one of the oldest criminal offenses under the law?
  • Juvenile firesetters are ________.
  • Which dimension is critical in assessing surface fuels?
  • What are crowns in relation to trees?
  • What is empirical data based on?
  • Which methods can ignite gas from a burner?
  • Which type of fuel injection system is commonly found in modern vehicles?
  • In ordinary construction, what are exterior walls made of?
  • How would you best define the chemical reaction of fire?
  • In fire investigation, what is the purpose of report reviews?
  • What is a characteristic of a laceration sustained in a seismic event?
  • During every fire scene examination, the presence and condition of fuel gas systems need to be what?
  • How is the combustion of a fuel mixture affected by balance?
  • What does GFCI stand for?
  • What are the key elements identified by OSHA for workplace safety?
  • What are key components of a fire scene investigation?
  • Is it difficult to determine a fire's cause if the area of origin cannot be reliably identified?
  • What is the role of the lab in evidence transport?
  • What is the primary purpose of fire patterns analysis?
  • What types of toxins are typically found at fire scenes?
  • What can happen when a positively charged lead goes to the ground?
  • Which path does electricity typically follow?
  • What size wire is commonly applied to appliances such as electric ranges and dryers?
  • What specific component is crucial to document when investigating fire incidents related to alarms?
  • The investigator should keep in mind that the point of the leak may be ______ from the actual damage.
  • What type of reasoning is primarily used in the hypothesis testing step of the scientific method?
  • Which of the following is a critical element of fire investigation?
  • What are two types of physical or phase changes?
  • Which of the following is NOT one of the types of report reviews?
  • Which factor influences the validity of char depth analysis?
  • What is a key property of effective insulation materials in fire scenarios?
  • A blast pressure front encountering a significantly different temperature layer may cause what?
  • What is the primary characteristic of insulation materials?
  • What are the most common types of pressure regulators?
  • Why is the melting temperature of solid materials important to fire investigators?
  • What is the first step in the scientific method?
  • According to NFPA 1033, what is required of fire investigation experts?
  • NFPA 921 defines motive as ______.
  • Who is generally responsible for security and access at an investigation site?
  • What is the purpose of a catalytic converter?
  • What are the primary forms of discovery in investigations?
  • Which of the following is a crucial element for determining the area of origin in a fire investigation?
  • What is a common responsibility during a fire investigation?
  • What might indicate the occurrence of spot fires?
  • A tank is defined as a storage container with greater than how many gallons water capacity?
  • During a trial, what key role does a fact witness provide?
  • What must physical evidence be to be admissible in court or other proceedings?
  • What does the flammable range refer to in fire investigation?
  • What does thermal decomposition signify?
  • What is the weight of water per gallon?
  • What aspect of an investigation can be thoroughly examined during legal proceedings?
  • What is the primary method of recording a scene?
  • When collecting conductors from an arc survey site, what should an investigator ensure?
  • The compartmentation of a structure refers to what?
  • What should investigators be aware of regarding fire extinguisher usage during a vehicle fire?
  • Why is arcing described as brief and localized?
  • What type of device is a manual fire alarm box?
  • What should be considered during the hypothesis testing process?
  • Which OSHA standard addresses safety aspects related to confined spaces?
  • What is one potential consequence of improperly trained fire investigators?
  • What does heat transfer refer to in fire investigation?
  • What is a characteristic of an arc?
  • How does radiation occur in the context of heat transfer?
  • What type of fuels do engine lubricants belong to in vehicles?
  • What behavior is often associated with adolescent firesetters aged 14 to 16?
  • Which compounds may be found in blood due to fire exposure?
  • What should be worn when ventilation cannot reduce the amount of toxins on scene?
  • In a well-developed compartment fire, fire investigators may find it difficult to do what?
  • The strongest chain of custody has one link. What is it?
  • What is the starting level of oxygen in the atmosphere?
  • What process must products such as wood and paper undergo to produce char?
  • What is defined as a means of analysis used by researchers in the sciences?
  • What is the purpose of a "formal interpretation" in fire investigation standards?
  • What is the maximum water capacity for cylinders?
  • What describes an arc in electrical terms?
  • What are the two basic types of fire patterns?
  • How does calcination occur?
  • ______________ are small, solid, powdery particles that extinguish the flame by covering the protected area of a fire.
  • Which of the following statements is about the growth and development of fire?
  • What does beveling indicate in fire investigations?
  • How is the size of fuel gas piping determined?
  • What is the main function of a pressure regulator in gas supply systems?
  • Where do high voltage arcs typically exist?
  • Physical evidence can be characterized as what two types?
  • The role of a fire investigator includes ______.
  • What fuels burn without the production of smoke?
  • According to ANSI Z 535.4, what does a "warning" label indicate?
  • What is an exemplar in the context of fire investigations?
  • What is the role of an investigator when dealing with fire scenes?
  • This tool is used to facilitate the documentation of fire scene images:
  • What conditions must be met for ignition from an electrical source to occur?
  • Why are snags considered important in fire behavior analysis?
  • What is the primary function of a gas burner?
  • Which of the following elements is key in determining how a fire spread?
  • What is the common method by which combustion air is provided?
  • During a fire, can materials change their physical state due to heat?
  • What type of fuel is characterized as being inorganic?
  • What are fulgurites?
  • What is calcination in the context of fire investigations?
  • If you're not qualified to analyze vehicle systems, what should an investigator do?
  • Your perimeter on an explosion incident should be set up ______.
  • After flashover, fire burning transitions from which condition to another?
  • What is the significance of understanding fire dynamics?
  • What condition does hyperthermia describe?
  • Vehicle identification begins with which of the following?
  • Arc mapping is based on which principle?
  • What is the most common type of mechanical explosion encountered by investigators?
  • What is a diffusion flame?
  • What type of environment might require specific coatings on sprinkler heads?
  • Is the use of a neutral UV filter on a camera recommended for all fire scene photography?
  • Insulation or conductors in electrical systems primarily prevent what?
  • What happens to the combustion process when there is insufficient air?
  • What unit is electrical power measured in?
  • What is a significant aspect of conducting a fire investigation?
  • Which of the following is an example of documentary evidence?
  • Under high voltages, what property does air exhibit when conductors are separated?
  • What is a common consequence of compromised fuel containment systems?
  • Which step in the scientific method involves testing hypotheses?
  • In fire investigations, what does the term "area of origin" refer to?
  • What is amperage?
  • What are fireballs?
  • A plan in fire investigation is most often referred to as what?
  • What does site safety require identification of?
  • Which NFPA standard pertains to low-rise residential occupancies?
  • What does Ohm's Law define?
  • Which of the following is considered an aftermarket item for vehicles?
  • In a complex investigation, handling of evidence should be designated to whom?
  • What does RTI stand for in fire investigation?
  • Carbon dioxide (CO2) is a good suppression agent because ___________.
  • What is a hybrid vehicle?
  • Why is documentation of investigative notes crucial in fire investigations?
  • Which type of fuel typically requires the lowest energy to ignite?
  • What are the conditions necessary for static arc ignition?
  • What are the degrees of burns defined as?
  • Which of the following are the three fuel categories in vehicle fires?
  • What can the main electrical distribution panel often be referred to as?
  • What is the importance of collecting witness statements in a fire investigation?
  • What does HRR stand for in fire science?
  • Visible fire effects should lead investigators to identify what?
  • What is the purpose of the Freedom of Information Act?
  • What is a primary requirement for proving arson?
  • Modern vehicles commonly include which of the following as part of the airbag activation system?
  • What component can contribute to the ignition of a gas fire?
  • What does spalling refer to?
  • Is it true that flames can transition from a premixed to a diffusion flame?
  • Natural gas is supplied through which of the following?
  • What terms describe individuals involved in three or more fire sets?
  • What is the ignition temperature range of propane?
  • Which of the following would NOT typically be considered a symptom leading to juvenile firesetting?
  • A delay to wait for daylight during an investigation is generally considered?
  • Farm, logging, construction, or highway maintenance equipment may contact which type of material?
  • What primarily influences conduction?
  • What is the significance of a fire investigation report?
  • What is the equation for Ohm's Law?
  • What is required to establish a single phase system?
  • What happens to air when it is dry?
  • Which type of data should be included for identification on a tag or package of physical evidence?
  • Which of the following is an example of a non-seated explosion?
  • What can severe charring patterns indicate in fire investigations?
  • Which of these is an important factor when creating a protocol?
  • What does NFPA 10 pertain to?
  • What are blow holes indicative of in fire investigations?
  • What kind of evidence can an eyewitness provide in the absence of physical evidence for establishing origin?
  • What defines an area of origin in a fire investigation?
  • Which of the following best describes an impact load?
  • What is the only definitive method to demonstrate actual melting of steel?
  • In fire investigation, what does the term "origin" refer to?
  • What is the point of origin in a fire investigation?
  • How often is NFPA 1033 revised?
  • Who should receive a full autopsy to determine cause of death in fire cases?
  • What happens to engine oil, power steering fluid, and brake fluid when in contact with heated exhaust components?
  • What does the inability to identify the point or area of origin not preclude?
  • Which of the following is NOT a primary factor that affects wildfire spread?
  • Which of the following is a method of standard communication in fire investigations?
  • What is the definition of fire?
  • What might cause ignition of undercoating and interior carpet in a vehicle?
  • What systematic approach is utilized by investigators?
  • What does probable cause allow law enforcement to do?
  • Which of the following describes the primary function of evidence collection in investigations?
  • What is the definition of a protocol in the context of fire investigations?
  • Some of the most common forms of gas utilization equipment are ________.
  • What causes static electricity to build up?
  • What is a common reason for juvenile firesetting?
  • Who determines the qualifications of an expert witness in a trial?
  • Should an investigator only focus on proving a hypothesis?
  • Which unit is most commonly associated with measuring mechanical power?
  • What impact does the LEL and UEL have on combustion?
  • Which of the following is a reason to monitor the atmosphere continuously at a fire scene?
  • What does distortion or deformity of an object indicate in terms of temperature?
  • What can excessive overcurrent result in?
  • When should a fire scene be thoroughly photographed?
  • What does an investigator risk if they do not adhere to safety protocols?
  • How is voltage commonly represented in equations?
  • What is defined as a column of hot gases, flames, and smoke rising above a fire?
  • Polyvinyl chloride is commonly used as what?
  • What effect does moisture have on vegetation with respect to fire?
  • What role does an odorant play in gas investigations?
  • What should investigators do if they suspect the presence of hazardous materials?
  • When fire damage is inconsistent with the fire load, what is the appropriate action?
  • What type of electrical circuit may RVs utilize?
  • What can cause static electricity to accumulate?
  • What must a fire investigator consider when interpreting fire patterns?
  • The first material ignited that sustains the combustion process beyond the actual ignition source must be ______.
  • What is char?
  • What is a primary fire risk associated with radiant heaters?
  • True or False: During the combustion process, multiple by-products are released.
  • A complex investigation generally includes what?
  • What are the common signs that indicate arson?
  • What defines a total burn at a fire scene?
  • Which condition must be satisfied for a fire to ignite from electrical failures?
  • What type of injury is shrapnel associated with during an explosion?
  • What distinguishes a V-shaped pattern from a U-shaped pattern in fire investigation?
  • What is the purpose of analyzing fire incident data?
  • In fire investigations, identifying areas of origin helps in?
  • A circuit that does not contain inductance and capacitance is a ____________.
  • What is an interested party in the context of fire investigation?
  • What type of information might be deemed pertinent during a witness interview?
  • Which of the following conditions could lead to a backdraft?
  • Why must an investigator be cautious with information obtained during an investigation?
  • What factors define sprinkler heads?
  • When evaluating surface fuels, what specific characteristic should be noted about dead leaves?
  • What is the minimum ignition energy required for fugitive gases?
  • What does NFPA 921 provide for fire investigations?
  • What does the term 'slope aspect' refer to?
  • Which organizations are fire investigators encouraged to join?
  • Why is duff not a major influence on fire spread?
  • True or False: Origin determination and cause determination are two unrelated topics.
  • A trailer is __________.
  • Water-based sprinkler systems can be categorized into which of the following types?
  • What defines confidential communications in a legal context?
  • What is the purpose of a chain of custody in evidence handling?
  • How many spokespersons should represent each interested party in a fire investigation?
  • What does fire pattern analysis involve?
  • What must the air-to-gas ratio be within for fuels with a high surface-to-mass ratio to sustain combustion?
  • True or False: Evidence technicians require special training to perform their duties properly.
  • True or False: Fuel gases can function both as the initial fuel and as a fuel source for the fire.
  • What is a crucial factor when identifying vehicle evidence?
  • What role do dust explosions typically play in industrial settings?
  • What is a weatherhead in terms of electrical service?
  • Why is it important to consider all relevant data in fire investigations?
  • In fire investigation, what does "heat shadowing" imply?
  • Which characteristic of wires does a lower AWG number signify?
  • What is the main purpose of grounding in electrical systems?
  • In a vehicle investigation, what should the investigator start with?
  • In what areas might a fire investigator render opinions?
  • Marking arc sites will help illustrate what aspect during an investigation?
  • What method is commonly used to locate leaks in fuel gas piping?
  • What qualifies as a solid fuel within or on a vehicle?
  • Devices connected to openings in tanks are known as:
  • What type of meter measures electricity consumption at a site?
  • What risk arises if a leak of propane or natural gas occurs?
  • Which of the following is NOT a common type of pressure regulator?
  • What does isochar represent?
  • What does the term 'allowing of metals' refer to?
  • What happens to concrete, brick, and masonry items when heated?
  • True or False: Portable lighting is not required at every fire scene.
  • If the electronic control module remains undamaged by fire, what can a technician do?
  • Where can an investigator view various technical manuals?
  • What type of evidence are fire patterns classified as?
  • What is meant by "seismic effect" in the context of fire investigations?
  • What are interstitial spaces in a building?
  • Where can guidelines for proper PPE for wildland firefighting be found?
  • What does it mean when a material undergoes thermal decomposition?
  • What does depth of calcination analysis measure?
  • What is the first component of the fire tetrahedron?
  • Which statement best describes the effect of heat on materials?
  • What is the result of an electric spark caused by static electricity?
  • What is a significant consideration when determining the cause of a fire?
  • What are the levels of hypothesis certainty?
  • What type of flame is most efficient in burning fuels completely?
  • What is crucial when managing the overhaul process in fire investigations?
  • Can melting and vaporization be reversible processes upon cooling?
  • What should be the first priority before examining electrical equipment?
  • What are the three most commonly used conductors?
  • What basic incident information must be obtained during the initial assignment and response?
  • Why might exhaust venting be crucial in a building?
  • What should every report an investigator completes include?
  • How are early hypotheses characterized in the context of fire investigations?
  • In which scenarios are overloads that cause fires least likely to occur?
  • A lay witness is also referred to as what?
  • What is one key advantage of photoelectric smoke detectors over ionization detectors?
  • What effect does the production of dense black smoke indicate in a fire scenario?
  • Which of the following is an example of a diffusion flame?
  • Which statement best describes what happens during full room involvement in a fire?
  • What is the fire point of a volatile combustible substance?
  • Why is understanding COHb levels important in fire investigations?
  • What is a defining feature of photoelectric smoke detectors?
  • What is expectation bias in the context of an investigation?
  • How should all fire investigations be approached?
  • What must be done with a hypothesis according to the scientific method?
  • What can the measurement of heat flux indicate?
  • Most vehicles primarily use what type of electrical current?
  • What is considered the single most important factor in survivability during a fire incident?
  • What can happen to combustible metals upon ignition?
  • Which of the following is necessary to evaluate the presence of multiple heat sources?
  • What types of output signals can a fire alarm control unit generate?
  • What factors should an analysis be based on?
  • Courts in some states recognize what as a legal cause of action against a spoliator?
  • Grass and weeds influence fire spread mainly based on what factor?
  • Through deductive reasoning, an ultimate conclusion can be described as?
  • To whom do NFPA documents apply when adopted?
  • What is the purpose of evidence collection in a fire scene investigation?
  • Which of the following factors is essential for understanding fire dynamics?
  • What action should be taken to ensure reliable witness testimonies?
  • What does the administrative review of an investigation lack according to standard critique procedures?
  • What type of system involves smoke detectors as a critical component?
  • What does carbon monoxide bind with when inhaled?
  • What is the primary focus of a technical review in fire investigations?
  • What is the primary use of LP gas?
  • True or False: Temperature and flame color should be relied on as indicators of what is burning.
  • What is cured grass?
  • Which OSHA regulation deals with operations at a hazardous waste site?
  • What role does visual representation play in scene investigation?
  • What is a primary reason for maintaining a safe distance from the fire scene?
  • What is the usual voltage of a vehicle battery?
  • What are spot fires?
  • Limited air for combustion primarily results in:
  • What is the primary purpose of documenting an interview conducted by an investigator?
  • Why is early suppression of a fire within the area of origin a priority?
  • What characteristic do aluminum conductors exhibit in the event of a fire?
  • What is a major consequence of failing to recognize signs of lying during an investigation?
  • Container appurtenances refer to what?
  • Where will fire patterns primarily develop?
  • What is the purpose of vaporizers in industrial applications?
  • In fire investigations, what is the significance of a model?
  • What can happen to PVC in a fire?
  • What is the condition of standard conductors melted by fire?
  • True or False: The investigation process can include evaluating the building's structural integrity.
  • What defines an incendiary fire?
  • For photographs to be admissible in court, they must meet which criteria?
  • If a civil or criminal matter is not settled, what is the next step?
  • Which of the following describes U-shaped patterns in fire investigation?
  • What does the acronym ICS stand for in fire investigations?
  • Buoyant flows in fire scenarios are caused by what phenomenon?
  • Overcurrent protection devices can be categorized as?
  • Which type of explosion is typically characterized by the rapid expansion of gases?
  • What is a fuel load and why is it important to fire spread?
  • What is thermal inertia?
  • How should the investigation process of a vehicle be divided?
  • What is the flammable range of un-diluted propane?
  • What type of claims frequently result from fire incidents?
  • When dealing with fuel gas systems, it is recommended that the investigator seek _____.
  • What are some of the best fuels commonly composed of?
  • What does the color of an electrical conductor typically indicate?
  • True or False: Toxins remain in the air after a fire has been extinguished.
  • What does cupping refer to in fire investigations?
  • What should an investigator prioritize when reviewing evidence?
  • What is a three-phase system in electrical contexts?
  • What aspect has a significant effect on the results of an explosion?
  • Which aspect is critical when investigating confined spaces?
  • A fire scene is authorized as part of what type of circumstance?
  • _______ circuits distribute the electricity from the circuit breaker or fuse panel throughout the building.
  • What are shiny char blisters on a burned surface called?
  • What is the impact of fuel type on explosions?
  • What are common alert words associated with fire safety?
  • What system has proven to be highly effective for early occupant notification during a fire?
  • What is a county?
  • The primary purpose of fire investigation is to ______.
  • What is an inverted cone pattern in fire investigation?
  • What is the primary function of a turbocharger in an engine?
  • What allows entry onto property to suppress a fire when reported?
  • What type of fire suppression system utilizes gas or chemical agents?
  • What is a method to detect anomalies along a conductor?
  • Which of the following is an example of an organic fuel?
  • Starting after 1970, what was modern carpet manufactured in the US required to do?
  • Which three branches make up the federal government?
  • What is an example of a reliable method for confirming gas leaks?
  • What is a lay witness?
  • When another investigator reviews your report, what should they ideally be able to do?
  • Dead leaves and coniferous litter are categorized as what type of material?
  • What can contribute to the overload of a vehicle's electrical system?
  • What is meant by fuel source with the right air mixture in ignition context?
  • A premixed burning flame occurs when:
  • If a fuel is below the lower explosive limit or above the upper explosive limit, what is the combustion state?
  • A statement of danger should identify what?
  • How are lines of demarcation created?
  • How is heat flux defined?
  • What does cognitive testing evaluate in fire investigations?
  • What is the main purpose of using the NFPA standards?
  • What might be a sign of heat exposure on exposed bones during a fire?
  • What is the purpose of a systematic approach in fire investigation?
  • What is a common method of investigating fire incidents?
  • What does the "rainbow effect" refer to in fire investigations?
  • Which scientific method step involves analyzing data?
  • Which actions can significantly alter fire patterns?
  • Forensic and legal requirements mandate that evidence be:
  • A(n) _____________ assumes a special role in the courtroom, testifying about personal knowledge and facts known before or at trial.
  • What role does experience play in conducting fire analysis?
  • Every fire is considered a _________ that requires a response by the fire service.
  • What is pyrolysis?
  • What is a consequence of having higher conductivity in metals?
  • What term describes the rate of doing work in an electrical circuit?
  • What does vaporization refer to in fire investigations?
  • Which of the following best defines electric current?
  • Why should confirmation bias be avoided in fire investigations?
  • What term describes upright containers for gases or liquids?
  • What happens when a component is removed from the fire/combustion process?
  • TRUE or FALSE: The complexity of the investigation dictates the detail of sketches, drawings, or data collection.
  • What are typically employed as overcurrent protection devices in appliances?
  • Why do metals increase in surface temperature slowly?
  • What is a common motivation for child firesetters?
  • What does a tool mark at a point of forcible entry signify in fire investigations?
  • What does real evidence refer to in the context of court proceedings?
  • What happens to the mass of an object when it is consumed during combustion?
  • Corrosion may cause as many as what percent of all known gas leaks?
  • What device prevents damage to conductors during excessive current flow?
  • What is the primary characteristic of a flashover in a fire scenario?
  • What is a parting arc in electrical systems?
  • An investigator should be able to recognize what indicators on a vehicle fire?
  • What does voltage drop refer to?
  • When do NFPA documents hold legal power?
  • How must a body found at a fire or explosion scene be treated?
  • What happens when a seizure occurs in legal terms?
  • Are fire movement patterns better indicators of origin than intensity patterns?
  • What type of questioning allows a witness to provide a narrative response?
  • When using arc mapping, what does the presence of electrical arcing indicate?
  • What impact do hydrocarbons have in the context of fire?
  • Which of these is the formula for calculating power?
  • Which of the following is a common fire suppression activity used in wildfires?
  • Which factor does NOT affect the rate of char?
  • What is crucial for determining the cause of a fire?
  • True or False: Sometimes fire patterns are not visually obvious.
  • TRUE or FALSE: The presence of the rainbow effect at a fire scene is a reliable indicator of an ignitable liquid being present.
  • What is typically insufficient energy to ignite most higher density combustibles?
  • Which gas is heavier than air?
  • Which component is essential for alerting occupants in a fire alarm system?
  • What challenges may an investigator face during litigation?
  • Where are pressure regulators typically attached?
  • Which type of buildings primarily use combustible materials?
  • What level of carboxyhemoglobin (COHb) in the body is generally considered fatal?
  • What is a key factor that impacts witness accuracy in reporting fire growth?
  • What impact does overheating have on combustible fluids in a vehicle?
  • A copper conductor's melting temperature may be affected by ______.
  • What defines an "interested party" in a fire investigation?
  • Investigations should be approached in what manner for consistency?
  • What is one of the first tasks an investigator should conduct at a fire scene?
  • Which characteristic is NOT associated with a "warning" label?
  • Which aspect is considered important when transporting evidence?
  • Which of the following could prevent the area of origin from being defined?
  • What characterizes an exothermic reaction?
  • A hypothesis must be supported by what?
  • What is deductive reasoning?
  • In terms of law enforcement, what does "probable cause" give them the right to do?
  • What occurs when current flows through a high resistance path?
  • What might be challenging to differentiate in well-developed compartment fires?
  • How can ignition sources be characterized?
  • Which method of evidence collection is recommended for accelerants?
  • A complex fire investigation generally involves which of the following?
  • What is the process of melting?
  • Electrical power is typically measured in which unit?
  • What key understanding should an investigator have when interacting with interested parties?
  • Under what circumstance may a BLEVE occur?
  • What are fire effects?
  • What is the common gauge size for household wiring?
  • True or False: An investigator should always assume that the point of greatest damage was where the fire burned the longest and therefore is the origin.
  • Why is determining the role of furnishings important in a fire investigation?
  • Which of the following are classified as groups of injuries related to an explosion scene?
  • How should a fire investigator visualize a fire?
  • What should investigators document when they suspect an ignition source?
  • Children are drawn to setting fires because of ________.
  • Which types of fires are covered by the standards set forth in NFPA 1033?
  • What has recently gained importance regarding evidence?
  • Which of the following are the three states of matter?
  • Which of the following is NOT a form of information?
  • In a fire alarm system, what is the role of initiating devices?
  • How does topography influence wildfires?
  • How does a fire plume affect the pattern of a fire?
  • What is static electricity?
  • Why is it essential to consider alternative hypotheses in investigations?
  • What does the color green indicate in fire investigation wiring?
  • What step in the scientific method typically involves inductive reasoning?
  • What is the common power source for appliances in fire investigations?
  • What is the term for when one type of metal falls onto another type?
  • What is defined as the zone inside a sealed evidence can, between the top of the fire debris and the bottom of the lid?
  • What is an example of indirect evidence in fire investigation?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy